Tools You Need to Build a Chicken Coop - dummies

Tools You Need to Build a Chicken Coop

By Todd Brock, David Zook, Rob Ludlow

Part of Building Chicken Coops For Dummies Cheat Sheet

The tools you need to construct a chicken coop depend on the kind of coop you choose to build and the materials you decide to utilize, but you’ll almost certainly need these building basics:

  • Personal safety gear: Don’t forget work gloves, protective goggles, and hearing protection. They’re the most important items in your toolkit.

  • Tape measure: Use a tape measure that’s at least 10 feet long and shows an incremental measurement at least every eighth of an inch.

  • Circular saw: This portable power tool is essential to coop construction. You may choose to also use a miter saw, a table saw, a jigsaw, and a handsaw for various steps, but a circular saw is almost a must-have.

  • Hammer: Select a hammer that you can swing comfortably. Even if you plan on predominantly using screws, you’ll need a hammer for knocking boards into position. For large jobs, consider a pneumatic nailer.

  • Drill: You’ll use a drill most often as a screw gun. If your drill is cordless, have a spare battery charged and ready to go to keep the job moving.

  • Level: You’ll likely find it handy to have more than one level: a pocket-sized torpedo level; a medium, 2-foot model; and a long, 4-foot carpenter’s level.

  • Speed square: You’ll find a speed square indispensable for marking straight lines, laying out and checking angles, and using as a cutting straightedge.

  • Tin snips: Just about every chicken coop on the planet uses some sort of wire mesh somewhere in its design. Tin snips are the best way to cut it.