How to Use Offset in AutoCAD 2014

You use Offset to create parallel or concentric copies of lines, polylines, circles, arcs, or splines in AutoCAD 2014. AutoCAD certainly does its best to be as accommodating as possible. Follow these steps to use Offset:

  1. Click the Offset button on the Home tab’s Modify panel, or enter Offset and press Enter.

    AutoCAD displays the current command settings and prompts you for the offset distance — the distance from the original object to the copy you’re creating:

    Current settings: Erase source=No Layer=
    Source OFFSETGAPTYPE=0 Specify offset distance or [Through/Erase/Layer] <Through>:
  2. Type an offset distance and press Enter.

    Alternatively, you can indicate an offset distance by picking two points on the screen. If you choose this method, you should normally use object snaps to specify a precise distance from one existing object to another.

    AutoCAD prompts you to select the object from which you want to create an offset copy:

    Select object to offset or [Exit/Undo] <Exit>:
  3. Select a single object, such as a line, a polyline, or an arc.

    Note that you can select only one object at a time with the Offset command. AutoCAD asks where you want the offset object:

    Specify point on side to offset or [Exit/Multiple/Undo] <Exit>:
  4. Point to one side or the other of the object and then click.

    It doesn’t matter how far away from the object the crosshairs are when you click. You’re simply indicating a direction.

    AutoCAD repeats the Select object prompt, in case you want to offset other objects by the same distance:

    Select object to offset or [Exit/Undo] <Exit>:
  5. Repeat Step 3 to offset another object, or press Enter if you’re finished offsetting objects.

For information on the command options — Multiple, Erase, and Layer are all useful options — look up OFFSET in the online Help system’s Command Reference section.

image0.jpg

If you want to offset a series of connected lines (for example, a rectangular house plan outline), either draw it as a polyline or convert the individual line and/or arc segments into a polyline with the Join command. If you draw a series of line segments with the Line command and then try to offset the segments, you have to pick each segment and offset it individually.

Even worse, the corners usually aren’t finished in the way you expect, because AutoCAD doesn’t treat the segments as connected. You avoid all these problems by offsetting a polyline, which AutoCAD treats as a single object.

  • Add a Comment
  • Print
  • Share
blog comments powered by Disqus
Advertisement

Inside Dummies.com

Dummies.com Sweepstakes

Win $500. Easy.