Nikon D7100 For Dummies
Book image
Explore Book Buy On Amazon

If you have decided you want to use the Autofocus setting on your Nikon D3100 when you’re shooting in Live View or Movie mode, you set up your focusing much the same as you would in still viewfinder photography. After setting the lens focus switch to A (if your lens has that feature) and choosing your Focus mode and AF-area mode settings, take these steps to focus:

  1. Locate the focusing frame in the Live View display.

    The appearance of the frame depends on the AF-area mode, as follows:

    • Wide Area and Normal Area: You see a rectangular focusing frame. (The figure shows the frame at the size it appears in Wide Area mode; it's smaller in Normal Area mode.)

      The Focusing Fram in a Nikon's Live View.
    • Face Priority: If the camera locates faces, you see a yellow focusing frame around each one. Note that one of the frames has double yellow lines. This indicates the face that the camera will use to set focusing distance.

      If you don’t see the highlight, the camera can’t detect your subject’s face, and it will set focus on the center of the frame.

      Nikon's display screen with two focusing frames: face priority and subject tracking.
    • Subject Tracking: A focusing frame appears.

  2. Use the Multi Selector to position the focusing frame over your subject.

    You can use the multi selector to move the focusing frame in the display screen of a Nikon.

    In Face Priority mode, you can use the Multi Selector to move the box with the double-yellow border from face to face in a group portrait. In the Wide Area and Normal Area modes, press OK to quickly move the focus point to the center of the frame.

  3. In Subject Tracking mode, press OK to initiate focus tracking.

    If your subject moves, the focus frame moves with it. To stop tracking, press OK again.

  4. In AF-S Focus mode, press the shutter button halfway to focus.

    If the camera can focus successfully, the focus frame turns green. You also hear a little beep (assuming you didn't disable the beep, which you can do via the Setup menu). Focus remains locked as long as you keep the shutter button pressed halfway.

    For movie recording, you can release the shutter button after focus is set.

  5. In AF-F mode, check the focus frame.

    Again, you don't press the shutter button halfway to focus in this mode; focusing occurs automatically. So just watch for the focus frame to turn green, indicating the camera found the focus target.

  6. (Optional) Magnify the display to double-check focus.

    After setting focus, you can press the Zoom In button to magnify the scene and check focus. Each press gives you a closer look at the subject.

    A small thumbnail in the corner of the monitor appears, with the yellow highlight box indicating the area that’s currently being magnified. Press the Multi Selector to scroll the display if needed.

    To zoom out, press the Zoom Out button until you see the entire scene.

    A zoomed in photo in a Nikon 3100/

    While the display is zoomed, you can press the shutter button halfway again to reset focus if needed — you don't have to zoom out to take that step.

About This Article

This article is from the book:

About the book author:

Julie Adair King is a veteran photography professional and instructor with more than 60 books to her credit. She has written all editions of Digital Photography For Dummies as well as 40 guides to DSLR camera models.

This article can be found in the category: