Canon EOS Rebel T6i / 750D For Dummies
Book image
Explore Book Buy On Amazon

After unpacking your Rebel T6i/750D camera, you have to assemble a few parts. In addition to the camera body and the supplied battery (be sure to charge it before the first use), you need a lens and a memory card. Here's what you need to know up front:

  • Lens: Your camera accepts Canon EF and EF‐S model lenses; the 18–55mm kit lens sold as a bundle with the camera body falls into the EF‐S category. If you want to buy a non‐Canon lens, check the lens manufacturer's website to find out which lenses work with your camera.

  • SD (Secure Digital), SDHC, or SDXC memory card: The SD stands for Secure Digital; the HC and XC for High Capacity and eXtended Capacity. The different labels reflect how many gigabytes (GB) of data the card holds. SD cards hold less than 4GB; SDHC, 4GB to 32GB; and SDXC, greater than 32GB.

With camera, lens, battery, and card within reach, take these steps:

  1. Turn the camera off.

  2. Attach a lens.

    First, remove the caps that cover the front of the camera and the back of the lens. Then locate the proper lens mounting index on the camera body. Your camera has two of these markers, one red and one white, as shown. Which marker you use to align your lens depends on the lens type:

    • Canon EFS lens: The white square is the mounting index.

    • Canon EF lens: The red dot is the mounting index.

      Align the mounting index on the lens with the one on the camera body.
      Align the mounting index on the lens with the one on the camera body.

    Your lens also has a mounting index; align that mark with the matching one on the camera body, as shown. Place the lens on the camera mount and rotate the lens toward the lens‐release button, labeled in the figure. You should feel a solid click as the lens locks into place.

  3. Install the battery into the compartment on the bottom of the camera.

    Hold the battery with the contacts down and slide it into the compartment. If you're using the supplied LP‐E17 battery, the Canon imprint faces the front of the camera, and the fine print faces the back. Gently push the battery in until the light gray lock clicks in place, as shown here.

    Push the battery down until it clicks in place.
    Push the battery down until it clicks in place.
  4. Make sure the camera is turned off and then insert a memory card into the compartment on the side of the camera.

    Open the memory card door and orient the memory card so that the notched corner is on top and the label faces the back of the camera. Push the card gently into the slot and close the cover. The following figure shows the door open and card partially inserted into the slot.

    Insert the memory card with the label facing the back of the camera.
    Insert the memory card with the label facing the back of the camera.

    Just above the card door is the card‐access light, labeled here, which lights while the camera is accessing the card, either to read existing data or record the last picture you shot. After you take a picture, make sure that the light is off, indicating that the picture data has made its way to the memory card, before you turn the camera off.

  5. Rotate the monitor to the desired viewing position.

    When you first take the camera out of its box, the monitor is positioned with the screen facing inward, protecting it from scratches and smudges, as shown on the left in the following figure. Gently lift the right side of the monitor up and away from the camera back.

    Here are just two possible monitor positions.
    Here are just two possible monitor positions.

    You then can rotate the monitor to move it into the traditional position on the camera back, as shown on the right in the figure. Or swing the monitor out to get a different viewing angle, as shown in here.

    You also can rotate the monitor away from the camera to find just the right viewing angle.
    You also can rotate the monitor away from the camera to find just the right viewing angle.
  6. Turn the camera on.

  7. Set the language, time zone, and date.

    When you power up the camera for the first time, the monitor displays a screen asking you to set the date, time, and time zone. The date/time information is included as metadata (hidden data) in the picture file. You can view metadata in some playback display modes and in certain photo programs, including Canon Digital Photo Professional.

    The easiest way to adjust the settings is to use the touch screen, which is enabled by default. Just tap an option to select it and then tap the up/down arrows at the bottom of the screen to set the value for that option. Finally, tap the OK icon to exit the screen. You also can adjust settings by using the Set button and the four keys surrounding it, known as cross keys. Press the left/right cross keys to highlight a setting, press Set to activate the option, press the up/down cross keys to change the value, and then press Set again to finalize the change.

  8. Adjust the viewfinder to your eyesight.

    This step is critical; if you don't set the viewfinder to your eyesight, subjects that appear out of focus in the viewfinder might actually be in focus, and vice versa. If you wear glasses while shooting, adjust the viewfinder with your glasses on.

    You control viewfinder focus through the dial labeled on the left side of the following figure. (In official lingo, it's called the diopter adjustment dial.) After taking off the lens cap, follow these steps:

    Use this dial to adjust the viewfinder focus to your eyesight.
    Use this dial to adjust the viewfinder focus to your eyesight.
  1. Look through the viewfinder and notice the thin black lines near the center of the frame.

    The lines represent the boundaries of the autofocus area (the portion of the frame that the camera considers when setting focus). If you can't make out the lines, point the lens at a light‐colored surface so that they're easier to see.

    You also can press the shutter button halfway to display shooting data at the bottom of the viewfinder, as shown in the figure. In dim lighting, the built‐in flash may pop up when you press the shutter button halfway; ignore it for now and close the flash after you adjust the viewfinder.

  2. Rotate the adjustment dial until the viewfinder markings and data appear sharpest.

    Ignore the scene you see through the lens; that won't change because you're not actually focusing the camera.

Can't get the display sharp enough? You may need an adapter that enables further adjustment of the viewfinder. Look for an E‐series dioptric adjustment lens adapter. Prices range from about $15–$30 depending on the magnification you need.

About This Article

This article is from the book:

About the book authors:

Julie Adair King has written more than 50 books on digital photography, cameras, and photo editing software. She also teaches beginning photography techniques to new dSLR owners. Robert Correll is the author of several photography books, including Digital SLR Photography All-in-One For Dummies.

This article can be found in the category: