Viewing Single Smartport Macro Details - dummies

Viewing Single Smartport Macro Details

By Edward Tetz

To see the details for only a single Smartport macro, like cisco-desktop, rather than displaying all the macros every time, use the name option. To display just the cisco-desktop macro:

Switch1> enable
Switch1#show parser macro name cisco-desktop
Macro name : cisco-desktop
Macro type : default interface
# macro keywords $access_vlan
# Basic interface - Enable data VLAN only
# Recommended value for access vlan should not be 1
switchport access vlan $access_vlan
switchport mode access
# Enable port security limiting port to a single
# MAC address -- that of desktop
switchport port-security
switchport port-security maximum 1
# Ensure port-security age is greater than one minute
# and use inactivity timer
switchport port-security violation restrict
switchport port-security aging time 2
switchport port-security aging type inactivity
# Configure port as an edge network port
spanning-tree portfast
spanning-tree bpduguard enable
# Remark all inbound data packets with COS=0 & DSCP =0
mls qos cos override