How to Replace a Section of Threaded Pipe
How to Replace Damaged Copper Pipe
How to Recognize Different Types of Pipes

How to Sweat Copper Pipe

Sweating a copper water line is relatively easy. Knowing how to sweat copper pipe allows a do-it-yourselfer to install pipe yourself. A properly sweated joint will last for years (in many cases decades).

Sweating copper pipe isn’t difficult, but it takes practice. Mastering a perfectly sweated copper joint takes a bit of practice. Be patient! Your first couple of attempts may not look beautiful, but soon you’ll be sweating copper that not only doesn’t leak but also looks good.

1

Use the wire brush to clean the pipe.

Clean down to bare metal.

2

Apply flux paste.

The flux paste ensures a clean surface for the solder.

3

Heat the fitting.

Use a handheld propane torch to heat the fitting. Just don't get it so hot that you can't hold it any more.

4

Melt the flux paste so that it flows into and fills the joint.

Finally, using the torch, melt the flux paste so that it flows into and fills the joint between the pipe and the fitting.

blog comments powered by Disqus
Finding the Main Water Shutoff Valve
How to Unclog a Sink's P-Trap
How to Quiet Noisy Water Pipes
How to Prevent Rust in Your Water Heater
How to Maintain Pipes and Ducts to Save Energy
Advertisement

Inside Dummies.com