Online Test Banks
Score higher
See Online Test Banks
Learning anything is easy
Browse Online Courses
Mobile Apps
Learning on the go
Explore Mobile Apps
Dummies Store
Shop for books and more
Start Shopping

Electronics Projects: How to Use a Servo in a Circuit

A servo is a special type of motor for use in electronics that is designed to rotate to a particular position and hold that position until told to rotate to a different position. Hobby servos are frequently used in radio-controlled vehicles such as airplanes, boats, and cars, but there are many other uses for servos.

This project shows you how to build a complete circuit that uses a servo as well as two pushbuttons. This circuit can run the following program.

' Servo Control Program
' Doug Lowe
' July 15, 2011
' This program moves a servo to one of two when SW1 is pressed
' and returns the servo to center position when SW2 is pressed.
' {$STAMP BS2}
' {$PBASIC 2.5}
Servo PIN 0
SW1  PIN 14
SW2  PIN 10
Position VAR Word
Position = 500
 IF SW1 = 1 THEN
  Position = 500
 IF SW2 = 1 THEN
  Position = 1000
 PULSOUT Servo, Position

For projects that require multiple servos or a lot of other work besides managing the servo, you should consider using Parallax’s Propeller chip instead of a BASIC Stamp. The Propeller processor is designed for programs that have to do several things at once, such as managing servos.

The propeller costs a little more than a BASIC Stamp and its programming language is a little more complicated, but in the end, controlling multiple servos is much easier with a Propeller than with a BASIC Stamp.

image1.jpg image2.jpg
  • Add a Comment
  • Print
  • Share
blog comments powered by Disqus

Inside Sweepstakes

Win $500. Easy.