 Boolean Logic and Electronic Logic Gates - dummies

In digital electronics, Boolean logic refers to the manipulation of binary values in which a 1 represents the concept of true and a 0 represents the concept of false.

In electronic circuits that implement logic, binary values are represented by voltage levels. In the most common convention, a binary value of one is represented by +5 V (also called HIGH), and a binary zero is represented by 0 V (also called LOW).

This type of logic is called Boolean because it was invented in the 19th century by George Boole, an English mathematician and philosopher. In 1854, he published a book titled An Investigation of the Laws of Thought, which laid out the initial concepts that eventually came to be known as Boolean algebra, also called Boolean logic.

Boolean logic is among the most important principles of modern computers. Thus, most people consider Boole to be the father of computer science.

In Boolean logic, true is represented by the binary digit 1 and false by the binary digit 0. Logical operations (also called logical functions) are functions that can be applied to one or more logic inputs and produce a single logic output.

One of the most common types of logic operations is NOT, which simply inverts the state of its input. In other words, with the NOT operation, if the input is true, the output is false; if the input is false, the output is true.

A gate is a circuit or device that implements a logical function. Thus, a NOT gate is a circuit or device that implements the logical NOT operation. NOT gates are very common in digital circuits.

You can create gate switches in a variety of ways. The most common method uses transistors as switches, arranged in such a way that the correct output is generated based on the logical inputs and the type of gate being implemented.

Regardless of the method used to create gate circuits, all logic circuits depend on different voltage ranges to represent 1 and 0. As I’ve already mentioned, the most common voltage convention is to represent 1 by approximately +5 V and 0 by approximately 0 V. The +5 V signal is usually referred to as HIGH, and the 0 V signal is usually called simply LOW.

Seven of the most common types of logic gates are: NOT, AND, OR, NAND, NOR, XOR, and NXOR. All these gates except NOT use at least two inputs; the NOT gate has just one input.

Gate Description
NOT Inverts the input (HIGH becomes LOW, LOW becomes HIGH)
AND Outputs HIGH if all the inputs are HIGH; otherwise, outputs
LOW
OR Outputs HIGH if at least one of the inputs is HIGH; otherwise,
outputs LOW
NAND Outputs HIGH if all the inputs are LOW; otherwise, outputs
LOW
NOR Outputs HIGH if at least one of the inputs is LOW; otherwise,
outputs LOW
XOR Outputs HIGH if one, and only one, of the inputs is HIGH;
otherwise, outputs LOW
NXOR Outputs HIGH if one, and only one, of the inputs is LOW;
otherwise, outputs LOW