How to Assemble Langstroth Frames
How to Choose Lumber for Your Beehive
Cut List for the Eight-Frame Langstroth Hive

Types of Fasteners for Building Beehives

Fasteners are the screws, nails, and staples you use to assemble your beehives and equipment. There are gazillions of different screws and nails in the marketplace. If you plan to build a number of different things, you can stock up on fasteners and take advantage of some quantity discounts (the unit price of nails in a big box is far less expensive than the unit price of nails in a small convenience pack).

For fasteners that will be exposed to the exterior elements, most plans specify a galvanized product because these won’t rust out or stain your woodenware. Epoxy-coated fasteners are also okay and seem to be gaining popularity. Alternatively, you can use stainless steel fasteners, but this option is way more expensive.

The types of screws most commonly used in beehives include the following:

  • a. #6 x 5/8 inch wood screws, #2 Phillips drive, flat-head

  • b. #8 x 1/2 inch lath screws, galvanized, #2 Phillips drive, flat-head with sharp point

  • c. #6 x 13/8 inch deck screws, galvanized, #2 Phillips drive, flat-head with coarse thread and sharp point

  • d. #6 x 2 1/2 inch deck screws, galvanized, #2 Phillips drive, flat-head with coarse thread and sharp point

The types of nails most commonly used in beehives include the following:

  • e. 6d x 2 inch galvanized nails

  • f. 5/32 inch x 1 1/8 inch flat-head diamond-point wire nails

  • g. 5/8 inch finish brad nails

  • h. 3/8 inch staples for use in a heavy-duty staple gun

The only other fastener you might use is foundation pins (i) for making frames, which are available from any of the major beekeeping supply houses.

Although drywall screws look really similar to deck screws and are much less expensive, don’t be tempted to use them for your beehives. They are weaker and aren’t treated to hold up to exposure to the elements. They’ll rust and corrode in no time flat.

Different fastener types typically used for beehive designs.
Different fastener types typically used for beehive designs.
  • Add a Comment
  • Print
  • Share
blog comments powered by Disqus
How to Choose a Beehive that Is Best for Your Needs
Cut List for the Hive-Top Feeder
Cut List for British National Hive Crown Board and Roof
Pick the Perfect Location for Your Beehive
11 Ways to Dress Up Your Beehives
Advertisement

Inside Dummies.com