Set an Autofocus Point on a Canon Rebel T3 Series Camera

When you shoot in Sports mode with a Canon Rebel T3 or T3i, the camera bases focus on the center focus point. In the other fully automatic exposure modes (Scene Intelligent Auto, Portrait, Landscape, and so on) as well as in Creative Auto and A-DEP mode, the camera’s autofocusing system looks at all nine autofocus points when trying to establish focus. Typically, the camera sets focus on the point that falls over the object closest to the lens. If these focusing decisions don’t suit your needs, you have two options:

  • Focus manually.

  • Set the camera to P, Tv, Av, or M exposure mode. In these modes, you can tell the camera to base focus on a specific autofocus point.

Again, manual focusing is a simple matter of setting the switch on the lens to the MF position and then twisting the focusing ring on the lens. To use autofocusing and specify an autofocus point, take these steps.

  1. Set the Mode dial to P, Tv, Av, or M.

  2. Press and release the AF Point Selection button.

    image0.jpg

    When you do, you see the AF Point Selection screen on the monitor. From this screen, you can choose one of two modes: Automatic AF Point Selection, in which all focus points are considered, or Manual AF Point Selection, in which you choose a single focus point.

    In Automatic AF Point Selection mode, all autofocus points appear in color. In Manual AF Point Selection mode, only one point is selected and appears in color.

    image1.jpg image2.jpg

    You can check the current mode by looking through the viewfinder, too. When you press and release the AF Point Selection button, all nine autofocus points turn red in the viewfinder if you’re in Automatic AF Point Selection mode. A single point turns red if you’re in Manual AF Point Selection mode.

  3. To choose a single autofocus point, set the camera to Manual AF Point Selection mode.

    You can shift from Automatic AF Point Selection mode to Manual mode in two ways:

    • Rotate the Main dial. This option is easiest when you’re looking through the viewfinder.

    • Press the Set button. Pressing the button toggles the camera between Automatic AF Point Selection and Manual AF Point Selection with the center point activated.

  4. Specify which AF Point you want to use.

    You can either rotate the Main dial or press the cross keys to select a point. When all autofocus points again turn red, you’ve cycled back to automatic AF Point Selection mode. Rotate the dial or press a cross key to switch back to single-point selection.

That’s all there is to it. After you select the autofocus point, just frame your shot so that your subject falls under that point and then press the shutter button halfway to focus.

blog comments powered by Disqus
Advertisement

Inside Dummies.com

Dummies.com Sweepstakes

Win $500. Easy.