Advertisement
Online Test Banks
Score higher
See Online Test Banks
eLearning
Learning anything is easy
Browse Online Courses
Mobile Apps
Learning on the go
Explore Mobile Apps
Dummies Store
Shop for books and more
Start Shopping

Install and Format the Memory Card in a NOOK Tablet

The kind designers of the NOOK Tablet made sure you don’t need a post-graduate degree in engineering to install and format a microSD or microSDHC memory card. You can get to the card slot without removing the back cover; you need no tools other than your fingers.

SD and SDHC are known as flash memory. That means once data is recorded, it remains in place even when the power is turned off.

The NOOK Tablet’s instruction manual and some advertising are a bit imprecise in the description of the type of memory card it uses. Here are the facts:

  • Do buy a microSD or microSDHC card.

  • Don’t buy an SD or miniSD card.

  • Don’t buy a microSDXC card.

For best results, buy a flash memory card with these specs:

  • microSDHC card

  • 16GB or 32GB

  • Class 6 speed

  • Made by Kingston, Lexar, Sandisk, or Transcend

Install a microSD or microSDHC card

Follow these instructions to install a memory card:

  1. Turn off the device.

    Technically this isn’t required, but it is a good practice anytime you’re working with electrical devices.

  2. Cover a well-lit, clean, level surface with a soft cloth. Lay the reader face down on the cloth.

    Make sure there are no cups of coffee, soda, water, molten iron, or anything else that could spill onto your tablet.

  3. Find the small gray protective cover near the open curved corner. Using the tip of your finger, gently pull the lip open and fold it flat against the back of the device.

  4. Hold the memory card with the logo facing up toward you; carefully slide it into the slot.

    Push gently against the card until it’s fully in place. Don’t force it into place; if you have the correct memory card (a microSD or microSDHC), it should fit easily. If it looks about twice as large as the opening, you’ve got the wrong card. Micros only need apply.

  5. Close the small gray lid and snap it into place.

    image0.jpg

To remove a memory card from your tablet, follow the first three steps for installing a card and then carefully slide the card out of its slot. Place the card in the protective case it came in (or in a clean plastic bag) and put it away for future use. Close the small gray lid and snap it into place.

Format a microSD or microSDHC

Your new microSDHC card may come formatted (a process that electronically indexes its memory so that the computer inside your tablet knows where to store or retrieve information). If you install an unformatted microSD or microSDHC card, the NOOK Tablet shows you a warning. No biggie: Use the Format command.

To format a microSD or microSDHC memory card from the warning, follow these steps:

  1. Tap the Format Now button.

    You’re asked if you are sure. Sure you’re sure!

  2. Tap Format Now.

  • Add a Comment
  • Print
  • Share
blog comments powered by Disqus
Advertisement
Advertisement

Inside Dummies.com

Dummies.com Sweepstakes

Win an iPad Mini. Enter to win now!