How to Share Your Digital Film on Vimeo
How to Use Time Remapping for Your DSLR Film
How to Set In and Out Points for Your DSLR Film

How to Troubleshoot Common Flip Video Problems

When figuring out a new gadget, you’re sure to encounter a few speed bumps, and the Flip Video camera is no different. Although the Flip is designed to be easy to use, you may be puzzled by one or two functions at first. Here's a list of common hiccups with the Flip camera, and it provides the solutions so you don’t have to do any heavy lifting.

Your flip camera won’t turn on/off

The Power button can seem finicky if you don’t understand how it responds to your touch, which can also make it seem like the button isn’t working when you want to turn your Flip off or on. Here’s the deal:

  • On: Press and let go of the Power button to turn on your Flip (assuming, of course, that the batteries are fresh or recharged).

  • Off: Press and hold the Power button to turn off your Flip.

If your Flip doesn’t turn on or off how it’s supposed to, remove the batteries or rechargeable battery pack (if your Flip model allows you to open the back and access the battery) and then reinsert the battery. Then press the Power button to turn on your Flip.

Your Flip camera is frozen

If your Flip is on and won’t respond when you press any buttons or when you press and hold the Power button for a few seconds, press and hold the Power button for 10 seconds to restart your Flip.

You need to reset your Flip SlideHD or Mino

If pressing and holding the Power button for 10 seconds doesn’t reset your Flip SlideHD or Mino, insert the tip of a straightened paper clip or a pin into the reset hole inside the camera’s tripod mount, and press and hold the reset button for 5 seconds.

Your Flip camera won’t record video when connected to TV

If pressing the Record button has no effect when you connect your Flip to your TV to watch saved videos on your Flip, disconnect your Flip from the cable connecting your camera to your TV if you want to capture new video.

You get a device removal warning when your Mac wakes from sleep mode

If your Mac goes into sleep mode while your Flip camera is still plugged in, the power supplied to your camera from your Mac’s USB port might suspend. If that happens, you might see a device removal warning message when you wake up your Mac. To deal with this, unplug your Flip from your Mac’s USB port, wait a few seconds, and then plug your Flip back into your Mac’s USB port.

image0.jpg

You want to regain full recording capacity

If you deleted some or all of your videos from your Flip camera, yet the available recording time seems too short despite the space you freed up, you can regain full recording capacity by following these steps:

  1. Plug your Flip camera into your computer.

    (Optional) If you have any video or other files saved on your Flip that you want to save to your computer, copy the files to your computer’s hard drive using FlipShare (or your chosen method) before you continue, and then quit FlipShare.

  2. Open a new Windows Explorer (Windows) or Finder (Mac) window and double-click your Flip camera’s icon. Then navigate to and open the folder where your Flip saves video files you record.

    image1.jpg
  3. Delete all the files contained in the folder and then empty the Recycle Bin (Windows) or Trash bin (Mac) to permanently delete the files from your Flip camera.

    (Optional) If you saved any video files outside the 100VIDEO folder (which is the default), delete those other files, too.

  4. Safely eject and then unplug your Flip from your computer.

  5. Press and hold the Power button to turn on your Flip, and then check the Time Left amount that appears at the bottom of the screen.

    If the time displayed is equal or close to the prescribed recording time for your Flip model, you’re ready to start capturing new videos. If the Time Left amount is not equal or nearly equal to the prescribed recording time for your Flip camera model, continue to the next step.

  6. Power your camcorder on and off eight times.

  • Add a Comment
  • Print
  • Share
blog comments powered by Disqus
How to Shoot Day for Night in Your DSLR Film
How to Edit Movie Clips with Premiere Elements Instant Movies
How to Add a Static Title to Your Digital Film
How to Shoot Your Own Chroma Key in Your DSLR Film
How to Tag Video in Premiere Elements Organizer
Advertisement

Inside Dummies.com