Online Test Banks
Score higher
See Online Test Banks
eLearning
Learning anything is easy
Browse Online Courses
Mobile Apps
Learning on the go
Explore Mobile Apps
Dummies Store
Shop for books and more
Start Shopping

How to Fix Loose Ceramic Floor Tiles

Fix a loose ceramic floor tile before the tile breaks. Loose floor tiles occur if the original adhesive doesn't seal properly or if the grout is chipped or uneven, allowing moisture to get under the tile. Securing loose ceramic or clay tiles before they break will save time and money down the road.

If a tile isn’t broken or cracked, you’re in good shape for fixing the floor. If you wait too long, loose ceramic or clay tiles will either break or pop off entirely and get lost. Either way, you're looking at more work.

1

Gather your materials: Iron, tile adhesive, putty knife, mineral spirits, rags, rolling pin.

You'll need just a small tub of tile adhesive.

2

Warm the tile with a preheated iron.

Don’t force out the tile. It could break. Heating the tile with a warm iron will loosen any adhesive that might still be holding the tile.

3

Lift out the loose tile with a putty knife.

Carefully lift the loose tile with a putty knife, working from center to edges on all four sides. Set the tile aside.

4

Dissolve the adhesive on floor.

A rag dampened with mineral spirits works great to dissolve the adhesive.

5

Scrape away the old adhesive.

Use your putty knife to scrape away the dissolved adhesive goo. Get it all out before you apply new adhesive.

Warning: Make sure your scraper doesn’t slip and damage surrounding tiles. If you encounter a stubborn spot, use the iron again to warm the adhesive, then scrape it out.

6

Apply adhesive to the new tile and to the floor.

Coat the empty patch of floor with adhesive.

7

Put the new tile in place.

You should have enough give to be sure get the tile is positioned just right.

8

Roll it with the rolling pin.

Pressing hard with the rolling pin will get rid of any trapped air pockets that will cause the tile to lift up.

9

Clean up excess adhesive.

A rag dampened with mineral spirits will clean up any adhesive around the edges of the tile.

10

Weigh down the tile with books.

Weigh down the tile with books for a day or two until you’re certain the bond can’t be broken.

   
blog comments powered by Disqus
Advertisement

Inside Dummies.com

Dummies.com Sweepstakes

Win $500. Easy.