How to Use White Balance Compensation on Your Canon EOS 6D
How to Check the Focus with Live View on the Rebel t5i
How to Use the Touch Shutter on the Rebel t5i

How to Add Cleaning Instructions to Images on the Rebel t5i

By default, your Canon Rebel t5i performs a sensor-cleaning routine every time you turn the camera on or off. This automated sensor cleaning normally is enough to keep the sensor dust-free. But if small spots appear consistently on your images, your sensor may need deeper cleaning.

The best solution is to take your camera to a repair shop for professional cleaning; it’s not recommended that you clean the sensor yourself because you can easily ruin your camera if you don't know what you're doing.

Until you can have the camera cleaned, however, you can use a software-based dust-removal filter found in Digital Photo Professional, one of the programs that ships with your camera. You start by recording a data file that maps the location of the dust spots on the sensor.

To do this, you need a white piece of paper or another white surface and a lens that can achieve a focal length of 55mm or greater. (Both of the kit lenses available for your camera qualify.) Then take these steps:

  1. Set the lens focal length at 55mm or longer.

  2. Switch the lens to manual focusing.

  3. Set focus at infinity.

    Some lenses have a mark that indicates the infinity position — the symbol looks like a number 8 lying on its side. If your lens doesn’t have the marking, hold the camera so that the lens is facing you and then turn the lens focusing ring clockwise until it stops.

  4. Set the camera to the P, Tv, Av, or M exposure mode.

    You can create the dust data file only in these modes.

  5. Display Shooting Menu 3 and choose Dust Delete Data.

    image0.jpg
  6. Choose OK.

    The camera performs its normal internal sensor-cleaning ritual, which takes a second or two. Then you see the instruction screen.

    image1.jpg
  7. Position the camera 8 to 12 inches from your white paper.

    The paper must be large enough to fill the viewfinder.

  8. Press the shutter button all the way to record the Dust Delete Data.

    No picture is taken; the camera just records the Dust Delete Data in its internal memory. If the process was successful, you see a screen with the message "Data obtained."

    If the camera can't record the data, the lighting conditions are likely to blame. Make sure that the lighting is even across the entire surface of your paper and that the paper is sufficiently illuminated, and then try again.

  9. Choose OK.

    The current date appears on the initial Dust Delete Data screen.

After you create your Dust Delete Data file, the camera attaches the data to every subsequent image, regardless of whether you shoot in the fully automatic or advanced exposure modes.

To clean a photo, open it in Digital Photo Professional and choose Tools→Start Stamp Tool. Your photo appears in an editing window; click the Apply Dust Delete Data button to start the dust-busting feature. The program’s Help system (choose Help→Digital Photo Professional Help) offers details.

blog comments powered by Disqus
How to Present a Slide Show with the Rebel t5i
How to Create a Custom Menu on Your Canon EOS 6D
How to Create Your Very Own Camera Menu on the Rebel t5i
How to Control Your Canon EOS 6D with Your Smartphone
How Edit Movies on the Rebel t5i
Advertisement

Inside Dummies.com