A Collection of Images from Buying & Serving Wine In A Day For Dummies
Bartending Basics: How to Cut Fruit for Garnishes
Identifying Gluten-Free Alcohols

Homebrewing Problem: No Fermentation

Fermentation problems occur frequently to homebrewers, and a common one is that the would-be beer just never started fermenting. Before you pour your homebrew down the sink, make sure the process actually hasn't started — judging fermentation by the bubbles (or lack thereof) coming out of the airlock can sometimes be deceiving.

Check for signs of fermentation:

  • Look at the beer (if it's in a glass fermenter) or peek through the airlock hole in the lid (if it's in a plastic fermenter). Do you see any foam or a ring of brownish scum around the fermenter? If so, the beer is fermenting or has fermented.
  • Use your hydrometer to check the gravity. The beer is typically done fermenting if the final gravity is 1/3 to 1/4 of the original gravity. For example: A 1.045 beer ferments down to 1.015 to 1.012 or below.

If after 24 to 48 hours fermentation has truly not begun — or you're just not sure — try adding more yeast. (Situations like this one give you good reason to keep a packet of dry yeast in the fridge for emergencies.)

If fermentation still hasn't begun after you add more yeast, you may have made one of the following mistakes:

  • You didn't rinse the sanitizer from the fermenter. Sanitizer residue can kill yeast, too. Be mindful of sanitary practices — how or when the beer ferments doesn't mean a thing if you contaminate the whole batch in the process.
  • You put the fermenter in a place that's too cold. Leave it at 64 to 72 degrees Fahrenheit for Ales.
  • You used old or dead yeast. The yeast contained in ingredient kits is often so old that it's useless — always buy fresh yeast that has been kept refrigerated.
  • You rehydrated the yeast improperly by using water that was too hot (more than 110 degrees Fahrenheit).Also, don't leave the yeast in the rehydration water too long; 30 minutes is plenty.
  • You used good yeast but shocked it with sudden changes in temperature or by adding it to wort that was too cold (under 70 degrees Fahrenheit) or too hot (over 110 degrees Fahrenheit). (Wort is unfermented beer; rhymes with dirt.)
  • You didn't use enough yeast. Pitch 10 to 15 grams of dry yeast, or use 1 package of ready-to-pitch liquid yeast per 5 gallons of beer.

Slow-starting or stuck fermentations usually mean under-pitching of yeast, underaerated wort, or both. To correct these problems in the future, pitch a larger volume of yeast and make sure you properly aerate the wort before pitching.

High-gravity worts (those with a specific gravity of 1.056 or higher) need even more yeast and aeration for proper fermentation.

  • Add a Comment
  • Print
  • Share
blog comments powered by Disqus
The Basics of Ales
Bartending Primer: Essential Recipes
Ten Terms for Describing Wine
Basic Conversions for Homebrewing
The Wines of California's Sonoma County
Advertisement

Inside Dummies.com