How to Move Figures with GeoMaster on the TI-84 Plus
Construct Points for Geometric Figures with the TI-84 Plus
Construct Circles with GeoMaster on the TI-84 Plus

Construct a Point on an Object in Cabri Jr.

You can use the Cabri Jr. geometry application on the TI-84 Plus to construct a point so that it becomes part of an existing object. To construct a point on an object, first press [WINDOW] and use

image0.png

to highlight the Point tool. Press

image1.png

to display the Point submenu and use

image2.png

to highlight the Point on tool.

  1. Press [WINDOW] and use

    image3.png

    to highlight the Point tool.

  2. Press

    image4.png

    to display the Point submenu and use

    image5.png

    to highlight the Point on tool. Press [ENTER] to select that tool.

  3. Use the arrow keys to move the cursor to the location on the object where the point is to be located.

    The object blinks when the cursor is on the object.

  4. Press [ENTER] to place the point on the object.

    The point is placed on the object at the location of the cursor. If you move this point at a later time, the point will move, but it will not move off the object.

After constructing one point on an object, the Point on tool remains active until you deactivate it. So if you want to construct more points on the same or different object, just repeat Steps 3 and 4. When you are finished using that tool, deactivate it by pressing [CLEAR] or by selecting another menu item.

  • Add a Comment
  • Print
  • Share
blog comments powered by Disqus
Construct Perpendicular and Angle Bisectors in Cabri Jr.
How to Construct Angle Bisectors with GeoMaster
Find the Slope and Construct a Vector with GeoMaster
Construct Lines, Segments, Rays, and Vectors on the TI-84 Plus
Construct Perpendicular and Parallel Lines in Cabri Jr.
Advertisement

Inside Dummies.com