Checking Your Tires for Wear
You should check your tires for wear at least once a month and before and after long trips. To determine whether you need to (a) buy new tires, (b) have your wheels balanced, (c) have your wheels aligned, or (d) change your driving habits, simply read your tire treads for clues. Table 1 and Figure 1 show you what to look for.
Table 1: How to Read Your Treads
Both edges worn
Add more air; check for leaks
Center treads worn
Let air out to manufacturer's specifications
Have wheels aligned
Treads worn unevenly, with bald spots, cups, or scallops
Wheel imbalance and/or poor alignment
Have wheels balanced and aligned
Erratically spaced bald spots
Wheel imbalance or worn shocks
Have wheels balanced or replace shocks
Edges of front tires only worn
Taking curves too fast
Have wheels aligned
Whining, thumping, and other weird noises
Poor alignment, worn tires or shocks
Have wheels aligned or buy new tires or shocks
Squealing on curves
Poor alignment or underinflation
Check wear on treads and act accordingly
Underinflated tires wear out faster, create excessive heat, increase fuel consumption, and make your car harder to handle. Overinflated tires can "blow out" more easily, wear out faster, and make the car unstable and unsafe to handle. And a new set of tires on wheels that are out of alignment can wear out completely in as little as one day of hard driving!
To determine what's causing problems with your tires, try the following:
- Look for things embedded in each tire. Do you see nails, stones, or other debris embedded in the treads? Remove them. But if you're going to remove a nail, first make sure that your spare tire is inflated and in usable shape.
- If you hear a hissing sound when you pull a nail, push the nail back in quickly and take the tire to be fixed. If you aren't sure whether air is escaping, put some soapy water on the hole and look for the bubbles made by escaping air. If you're still not sure whether the nail may have caused a leak, check your air pressure and then check it again the next day to see whether it's lower. Tires with leaks should be patched by a professional. If the leak persists, get a new tire.
- Look at the sidewalls. Check for deeply scuffed or worn areas, bulges or bubbles, small slits, or holes. Do the tires fit evenly and snugly around the wheel rims?
- Look at the treads. Most tires have tread-wear indicators built into them (see Figure 2). These bars of hard rubber are normally invisible but appear across treads that have been worn down to 1/16th of an inch of the surface of the tire (the legal limit in most states). If these indicators appear in two or three different places, less than 120 degrees apart on the circumference of the tire, replace the tire.
- If your tires don't show these indicators and you think that they may be worn below legal tolerances, place a Lincoln penny head-down in the groove between the treads. If you can see the top of Lincoln's head, your tire probably needs to be replaced.
- To measure tread wear more exactly, place a thin ruler into the tread and measure the distance from the base of the tread to the surface. It should be more than 1/16 inch deep. (Note: If your front tires are more worn than your rear ones and show abnormal wear patterns, you probably need to have your wheels aligned.)
- Pay attention to leaks. If you keep losing air in your tires, have your local service station check them for leaks. Sometimes an ill-fitting rim causes a leak. The garage has a machine that can fix this problem easily.
- If the garage can't find a leak, your rims fit properly, and you're still losing air, you probably have a faulty tire valve that's allowing air to escape. You can buy tire valves to replace the ones on your car. Look for the number molded into the base of the tire valves; then buy new ones that match it.
In the process of replacing the valve, you will lose most of the air from the tire, so either plan to do this job at a gas station where you can have access to an air hose, or have a mechanic replace the valve for you.